Check out our overview page with laser machines or let us advise you without obligation.
Before starting, make sure Illustrator "Document color mode" is set to RGB:
File => Document color mode
Make sure that the line color of the whole cutting line is the same. In this example, the entire cutting line is blue:
Make sure that the whole shape is closed; if that is not the case, follow these steps:
Select the pen tool.
Click the anchor point of the shape you want to close.
Click the other anchor point to close the shape.
Make sure the line color of the engraving lines is the same everywhere. In this example, all engraving lines are red:
LaserWork operates with an old file format of Illustrator only.
File => Save as…Save the file as .ai.
From the screen that opens, choose Version: Japanese Illustrator 3
Click OK
Open LaserWork => Click import
Open the file you were just saving from Illustrator.
The colors you specified in Illustrator are now visible in LaserWork. These colors have now become layers in LaserWork, so all settings can be adjusted per layer.
The complete overview of all laser machines will be sent directly to your mailbox.
Then you’ll see first hand what you can do with a BRM laser machine.
Then you’ll see first hand what you can do with a BRM laser machine.
