Peripherals

How to create a LOG file When using a BRM Extractor, you may encounter a problem of which you do not immediately know the cause. In that case, it may be helpful…

A compressor option allows you to add more air while cutting. This can be useful when cutting wood and other materials. You can cut thicker materials faster. BRM Original and BRM Slim…

How does the air supply work on my BRM Pro laser machine? The Pro laser machine includes a compressor connection as standard. The advantage of the compressor connection and using a compressor…

Supplied air pump A small air pump is supplied with the BRM Budget. It provides approximately 0.1 bar of pressure. You connect the air pump to the back of the laser machine.…

Supplied air pump A small air pump is supplied with the BRM Original. It provides approximately 0.1 bar of pressure. You connect this air pump to the back of the laser machine.…

Supplied air pump A small air pump is supplied with the BRM Slim. It provides approximately 0.1 bar of pressure. You connect this air pump to the back of the laser machine.…

When you own a BRM Original, you have received a chuck rotation with the machine. In the video below you can see how to install and use the rotation.

Why does the CW-5000 / CW-5200 water chiller raise an alarm? The CW-5000 and CW-5200 water chillers have an active cooling system. That means there is a heat exchanger in the water…

All the essential everyday knowledge about the water chiller to keep it in good condition so your laser source will be in top shape too! Why is cooling water so important? The…

Why does the CW-3000 water chiller raise an alarm? The CW-3000 is a water chiller that cools the water by releasing the heat to the environment through a fan. When the CW-3000…